Hi ,
tcode -> CRMD_ORDER -> create bussiness transaction shows a blank screen.
Attaching screenshot below.
↧
tcode -> CRMD_ORDER -> create bussiness transaction shows a blank screen.
↧
Reg: Solaris 10 to windows 2012
Dear All,
We are migrating our landscape from Solaris 10 to windows 2012 but the database oracle 11.2 remain same , we planning to use SWPM system copy method , What are all the prerequisites and post import process steps needs to be done.
Regards,
RK
↧
↧
Change in Host Name in SAP 4.7 R/3 Environment
Hi Friends,
We are running SAP 4.7 R/3 in our office with two servers production and development. Production Server with hostname :- production-2 & SID - "PRD" and Development Server with hostname :- hpserver & SID - "TES"
Recently, our development server crashed...
I installed SAP 4.7 R/3 in new hardware server with hostname as "DEVELOPMENT" & SID as "TES". Successfully restored oracle database from old development server and further applied SAP license key.
Today night, we are taking the new development server alive, my question is will there be any problems because of change in hostname (from old development server with hostname:-hpserver to new development server with hostname:-development) ???
Regards,
M Sridhar Srinivas
8108 252 001
↧
Failed to update service environment from user... in Windows Event Log.
Hallo guys,
I am new to SAP Systems and SCN, so I hope my post is right here.
I have got a SAP IDES System running an Windows Server 2008 (SP2) Enterprise Edition.
This Server is a mamber of an Domain.
When I start the Windows Server I can see an SAP specific Error in the Windows Event Log under Applications.
The error ist following:
----------
Failed to update service environment from user (SAPIDES\hp2adm) environment. [ntservmgr.cpp 222]
Source: SAPHP2_01
----------
After start of the System in the SAP MMC I get further errors in syslog in the SAP MMC:
----------
SAP-Basis System: Operating system call gethostbyname failed (error no. 11004)
USER: DDIC
Programm: SAPMSSY1
Process Type: D0
SAP-Basis System: Operating system call gethostbyname failed (error no. 11004)
USER: DDIC
Programm: SAPMSSY1
Process Type: B13
Communications data: Could not send SLD data
Programm: RSLDAGDS
Process Type: B13
SAPIDES is the name of the System and hp2adm is a local user on this server.
The IDES System can be started and I can also log in to the System.
At the moment I don't know where to start the error analysis.
Please tell me if you need additional information.
Greetings
Martin
↧
Update Optimizer Statistics is not active in DB13
Hi,
I would like to execute the statistics in the system but when I go to the transaction DB13 I don't see it.
Do I have to do something else? Or is not there because is running on the SQL side?
Thanks,
Carlos
↧
↧
Validity of certificate from list with PSE type >SSL. Client (Standard)< ends in 3 days
Hi
When a SSL Certificate is about to expire all user get an warning when the log on to the system.
I know this error will stop after inserting a new certificate with in strust.
I would like to disable this warning for all users , do you know how to do that ?
↧
FSL-01027 Account user="Domain\sidadm" does not exist.
Hi Team,
We have done the SQL DB Upgrade from 2008R2 to 2012, now we are running database Upgrade completion from SAPINST.
Im facing this below error.
The current server domain is FB & the SIDADM users are under different domain (Ex: say INDIA)
I've tried with FB & INDIA here, both are encountering same error.
Error log is saying
FSL-01027 Account user="INDIA\mpdadm" does not exist.
FSL-01027 Account user="FB\mpdadm" does not exist.
Regards
Nani
↧
BR0253E Function NetShareGetInfo() failed for 'sapmnt' errno 5: Access is denied.
I want to ask about backup using DB13 using tape.
I restart my server for a maintenance purpose. Before I restart my server, the backup is successfully done.
But after I restart the server and running "Initialize Tape" job using DB13 the job status is "Schedulling failed" and the Job Log is below :
Job started
Step 001 started (program RSDBAJOB, variant &0000000009952, user ID ABAP)
Execute logical command BRBACKUP On host smpsvr
Parameters:-u / -jid TAPIN20150225112203 -i force -c force -n 1 -v SCRATCH
BR0051I BRBACKUP 7.20 (36)
BR0252E Function NetShareGetInfo() failed for 'sapmnt' at location BrEnvProcess-115
BR0253E errno 5: Access is denied.
BR0206I End of backup volume initialization
BR0280I BRBACKUP time stamp: 2015-02-25 11.22.04
BR0054I BRBACKUP terminated with errors
External program terminated with exit code 3
BRBACKUP returned error status E
Job finished
Every job that I run ended with similar result.
I have do every solution i know like :
- making sure that folder 'sapmnt' have a proper permission for <SID>adm.
- environment variables are exactly the same with my other server.
Please give me suggestion for my problem. I have done everything I know but until now, there no way out of my problem.
Thanks before..
↧
SAP ON WINDOWS
Hello ,
I recently on boarded to a project where all the SAP Application are on Windows server 2012 with MSSQL DB. I want a clear picture on thease type of server. I haven't worked on Windows , Previously I have worked on AIX/ Linux env with DB2 . Could any one help and share the documents please.
Thanks in Advance.
↧
↧
Cannot start system, sapstart stucks at starting programs
Hello Experts,
We have upgraded our kernel version from 7.40 to 7.41, once starting the system using SAP MMC, we found that there are some subnodes that are missing and the system won't startup and does not display the process lists (disp+work, igwrd, etc).
Also upon checking on the logs, sapstart is stuck on "
We have also regenerated the SAP service, but the issue still remains
Hoping for your kind resolution with the issue.
Regards,
Manuel
↧
List of printers not getting displayed for one user.
Dear Friends,
We are running SAP 4.7 R/3 with 7.3 GUI. For one of the user, the list of all printers is not showing. Couldn't resolve the issue, by doing the following :-
(a) Tried from different computers.
(b) Deleting roles / profiles from user.
(c) Checking for filters in printer window.
Request necessary action.
Regards & Best Wishes,
M Sridhar Srinivas.
↧
Decompression error(receiving)- Program will be terminated
Dear Friends,
We are running SAP 4.7 R/3 with 7.3 GUI. In which we have a program named, ZRBC. Which runs successfully & displays output for 10000 people. However, if we are running for 40000 people. After approx one hour, the following is the outcome :-
(a) On few computers, all sessions gets terminated without any error notification.
(b) On few computers, there is an error message displaying as "Decompression error(receiving)- Program will be terminated" and particular session gets terminated after clicking "OK".
Please suggest necessary actions.
Regards,
M Sridhar Srinivas
↧
SAP Applications on Windows Server High Availability Guide for Windows Server 2012 R2 ?
Hello,
I don't found any documentation about installation or reference guide concerning High Availability on Windows Server 2012 R2.
Do you know where I can find that ?
Thank you
↧
↧
Cannot start SAPinst.exe from SWPM
Dear Expert,
I'm going to install SAP NetWeaver 7.3 in a Windows 2008 (R2) server.
After I extracted the .SAR files using Software Provision Manager 1.0, I run the
sapinst.exe file as administrator but it cannot start properly. The following error
message prompts:
Problem signature:
Problem Event Name: APPCRASH
Application Name: sapinst.exe
Application Version: 1.0.0.0
Application Timestamp: 501c58ce
Fault Module Name: MSVCR80.dll
Fault Module Version: 8.0.50727.4940
Fault Module Timestamp: 4ca2b4dd
Exception Code: 40000015
Exception Offset: 0000000000006a68
OS Version: 6.1.7601.2.1.0.272.7
Locale ID: 3076
Additional Information 1: 4f0d
Additional Information 2: 4f0d59b3e5e15cb33455b954a61e1ace
Additional Information 3: 3025
Additional Information 4: 30258b380493fa25f48eb5a791523fae
I've applied SAP notes #684106 by installing Microsoft Visual C++ 2005 SP1 Redistributable Package but it don't solve the problem.
Moveover, I've downloaded the latest version of SAPCAR.EXE and SWPM instead of using the Media from SAP, but it doesn't work as well.
Can anyone help on this issue? Many thanks.
Best Regards,
Theo
↧
Background Job O/P in Excel Format
Dear Friends,
One of our User's requires the Background job output in Excel format and this excel sheet has been send it to their mail ID.
Sucessfully I find how to send the backgroundjob spool output to the mail ID. I need your help in converting the spooler output into Excel format.
Regards,
Karthickbabu G.G
↧
Test call of transport control program (tp) ended with return code 0012
Hello everybody
when i transport the request in single system, from one client to another, then it give the following error
Test call of transport control program (tp) ended with return code 0012
So please suggest me how to solve the same
Thanks
Ganesh
↧
How to create virtual host for SAP High availability system
Dear Mentors
Please help us create the virtual hostname
Virtual hostname I required for global host preparation in sap high availability environment
Operating system : windows server 2012 R2
Database : Sybase ASE
The virtual host is required for ASCS instance
Before starting SWPM while first node installation
I was using option sapinst.exe SAPINST_USE_HOSTNAME=baseprd
I maintained hostname in DNS server also
I maintained host file also, c:\windows\system32\etc\hosts
But installation master throwing a error the specified network path is not available
I maintained virtual host name in DNS server also, when I was try to ping the given IP address .
the ip ping reply as message unable to reach destination message
but if I execute nslookup with ip address
it is giving domain name server Host name , IP address and with baseprd.besc.in & IP addresseagrds
I already referred the sap notes
1565274 & 1282975
please provide steps to create virtual hostname.
Thanks
Regards
Sudheer k
↧
↧
SAP Kernel upgrade from 700 to 720 on windows server 2003 & SQL server 2005
Dear Experts,
we are planning to upgrade kernel from 700 t0 720 kernel , please Guide me the procedure and what are the per-requisites
required what are the kernel file need to download please guide me how to do. What advices can you give for Kernel upgrade ( 700 - > 720 ) on windows server 2003 & SQL Server 2005.
| Kernel release | 700 |
| Compilation | NT 5.2 3790 Service |
| Sup.Pkg lvl. | 347 |
| ABAP Load | 1563 |
| CUA load | 30 |
| Mode | opt |
Rsyn file
Best regards
SURESH
↧
disp+work.EXE failing and stopping
Hello,
We have SAP ECC installed on our Windows 2012 R2 virtual machine. When I go to start the ECC system from the SAP MMC the disp+work.exe process is yellow and then grey out as stopped. I have just upgraded our version of SQL Server from Evaluation to Standard as i thought this dated installation was the issue..... obviously not!
Below is the dev_disp log file - any help would be greatly appreciated.
Thanks in advance
---------------------------------------------------
trc file: "dev_disp", trc level: 1, release: "741"
---------------------------------------------------
sysno 00
sid ECC
systemid 562 (PC with Windows NT)
relno 7410
patchlevel 0
patchno 11
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\SAPVIAMSAZURE\sapmnt\ECC\SYS\profile\ECC_DVEBMGS00_SAPVIAMSAZURE
pid 3136
Thu Apr 16 13:43:14 2015
kernel runs with dp version 197000(ext=117000) (@(#) DPLIB-INT-VERSION-197000-UC)
length of sys_adm_ext is 500 bytes
***LOG Q00=> DpSapEnvInit, DPStart (00 3136) [dpInit.c 574]
Thu Apr 16 13:43:15 2015
shared lib "dw_xml.dll" version 11 successfully loaded
shared lib "dw_xtc.dll" version 11 successfully loaded
shared lib "dw_stl.dll" version 11 successfully loaded
shared lib "dw_gui.dll" version 11 successfully loaded
shared lib "dw_mdm.dll" version 11 successfully loaded
shared lib "dw_rndrt.dll" version 11 successfully loaded
shared lib "dw_abp.dll" version 11 successfully loaded
DpCheckMulticast: check of IP v4 multicast address o.k.
rdisp/softcancel_sequence : -> 0,5,-5
use internal message server connection to port 3901
rdisp/shutdown/disable_login : 0
rdisp/snapshot(CREATE): DP_CS_RESOURCES_EXHAUSTED
rdisp/snapshot(PERIOD):300 sec
rdisp/snapshot(LINES):10000 lines
DpCommonParamInit: rdisp/core_file_size = default --> no change
Thu Apr 16 13:43:19 2015
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 4952]
MtxInit: 30000 0 0
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >SAPVIAMSAZURE_ECC_00 <
DpShMCreate: alloate/attach shared memory (mode=CREATE)
DpShMCreate: sizeof(wp_adm) 22848 (1088)
DpShMCreate: sizeof(tm_adm) 49394544 (245744)
DpShMCreate: sizeof(ca_adm) 432000 (72)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/7464064/7583152
DpShMCreate: sizeof(comm_adm) 7583152 (14912)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (296)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (80)
DpSockTableSize: max/headSize/ftSize/tableSize=500/16/520064/520080
DpShMCreate: sizeof(sock_adm) 520080 (1016)
DpShMCreate: sizeof(vmc_adm) 0 (3208)
DpShMCreate: sizeof(wall_adm) (ft=41664/fi=67472/hd=64/rec=192)
DpShMCreate: sizeof(amc_rec_adm) (ft=86464/fi=67472/hd=64/rec=416)
DpShMCreate: sizeof(websocket_adm) (ft=25664/hd=64/rec=232)
DpShMCreate: sizeof(gw_adm) 64
DpShMCreate: sizeof(j2ee_adm) 3936
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000FE60050, size: 58350720)
DpShMCreate: allocated sys_adm at 000000000FE60250
DpShMCreate: allocated wp_adm_list at 000000000FE71CE0
DpShMCreate: allocated wp_adm at 000000000FE72000
DpShMCreate: allocated tm_adm_list at 000000000FE77B40
DpShMCreate: allocated tm_adm at 000000000FE77D80
DpShMCreate: allocated ca_adm at 0000000012D932F0
DpShMCreate: allocated comm_adm at 0000000012DFCC70
DpShMCreate: system runs without slock table
DpShMCreate: allocated sock_adm at 0000000013538420
DpShMCreate: allocated vmc_adm_list at 00000000135B75B0
DpShMCreate: system runs without VMC
DpShMCreate: allocated gw_adm at 00000000135B7850
DpShMCreate: allocated j2ee_adm at 00000000135B7A90
DpShMCreate: allocated ca_info at 00000000135B8BF0
DpShMCreate: allocated wall_adm (ft) at 00000000135B8E30
DpShMCreate: allocated wall_adm (fi) at 00000000135C32F0
DpShMCreate: allocated wall_adm (head) at 00000000135D3C80
DpShMCreate: allocated amc_rec_adm (ft) at 00000000135D3EC0
DpShMCreate: allocated amc_rec_adm (fi) at 00000000135E9280
DpShMCreate: allocated amc_rec_adm (head) at 00000000135F9C10
DpShMCreate: allocated websocket_adm (ft) at 00000000135F9E50
DpShMCreate: allocated websocket_adm (head) at 0000000013600490
DpShMCreate: initialized 21 eyes
DpSysAdmIntInit: initialize sys_adm
Scheduler info
--------------
WP info
#dia = 10
#btc = 0
#standby = 0
#max = 21
General Scheduler info
preemptionInfo.isActive = true
preemptionInfo.timeslice = 500
preemptionInfo.checkLoad = true
Prio Class High
maxRuntime[RQ_Q_PRIO_HIGH] = 600 sec
maxRuntimeHalf[RQ_Q_PRIO_HIGH] = 300 sec
Prio Class Normal
maxRuntime[RQ_Q_PRIO_NORMAL] = 3600 sec
maxRuntimeHalf[RQ_Q_PRIO_NORMAL] = 1800 sec
maxTicketsForPrio[RQ_Q_PRIO_NORMAL] = 8
withPrioTickets[RQ_Q_PRIO_NORMAL] = true
Prio Class Low
maxRuntime[RQ_Q_PRIO_LOW] = infinite
maxRuntimeHalf[RQ_Q_PRIO_LOW] = infinite
maxTicketsForPrio[RQ_Q_PRIO_LOW] = 8
withPrioTickets[RQ_Q_PRIO_LOW] = true
DpCommAttachTable: attached comm table (header=0000000012DFCC70/ft=0000000012DFCC80/fi=000000001351B100)
DpSockAttachTable: attached sock table (header=0000000013538420/ft=0000000013538430)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpSockInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 21 initializing ....
<ES> EsILock: use Semphore 33 for locking
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 10035MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 10036MB
<ES> Info: disclaim threshold = 0 MB
<ES> Info: disclaim coasting/alloc = 300 s
<ES> Info: disclaim coasting/free = 0 s
<ES> Info: blockdisclaimsize_KB = 0 KB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 2508 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
rdisp/calculateLoadAverage : 1
***LOG Q0K=> DpMsAttach, mscon ( SAPVIAMSAZURE) [dpMessageSer 1637]
DpStartStopMsg: send start message (myname is >SAPVIAMSAZURE_ECC_00 <)
DpStartStopMsg: start msg sent to message server o.k.
MBUF state LOADING
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=6395 reserved=1918 quota=10%
CCMS: Initialized monitoring segment of size 60000000.
CCMS: Initialized CCMS Headers in the shared monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: AlMsUpload called by wp 1024.
Thu Apr 16 13:43:21 2015
CCMS: AlMsUpload successful for G:\usr\sap\ECC\DVEBMGS00\log\ALMTTREE.DAT (5694 MTEs).
Thu Apr 16 13:43:22 2015
CCMS: start to initalize 3.X shared alert area (first segment).
DpCheckPreemptionTicker: created thread for DpPremptionTicker
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1140]
MBUF state ACTIVE
DpMBufTypeMod: MBUF component UP (event=MBUF_DPEVT_UP)
DpMsgProcess: 1 server in MBUF
DpMsCheckServices()
DpMsCheckServices: send DpDelService(J2EE) to msgserver
DpMsgProcess: MBUF state is MBUF_ACTIVE
DpMBufReset: state = MBUF_PREPARED
Thu Apr 16 13:43:59 2015
*** ERROR => DpHdlDeadWp: W0 (pid 4116) died (severity=0, status=0) [dpxxwp.c 1278]
********** SERVER SNAPSHOT 1 (Reason: Workprocess 0 died) - begin **********
Scheduler info
--------------
WP info
DpNumberOfDiaWps: dia_wps 9, standby_wps 0
#dia = 9
#btc = 3
#standby = 0
#max = 21
General Scheduler info
preemptionInfo.isActive = true
preemptionInfo.timeslice = 500
preemptionInfo.checkLoad = true
Prio Class High
maxRuntime[RQ_Q_PRIO_HIGH] = 600 sec
maxRuntimeHalf[RQ_Q_PRIO_HIGH] = 300 sec
Prio Class Normal
maxRuntime[RQ_Q_PRIO_NORMAL] = 3600 sec
maxRuntimeHalf[RQ_Q_PRIO_NORMAL] = 1800 sec
maxTicketsForPrio[RQ_Q_PRIO_NORMAL] = 8
withPrioTickets[RQ_Q_PRIO_NORMAL] = true
Prio Class Low
maxRuntime[RQ_Q_PRIO_LOW] = infinite
maxRuntimeHalf[RQ_Q_PRIO_LOW] = infinite
maxTicketsForPrio[RQ_Q_PRIO_LOW] = 8
withPrioTickets[RQ_Q_PRIO_LOW] = true
Actual tickets in use
actTicketsInUseForPrio[RQ_Q_PRIO_NORMAL] = 0
actTicketsInUseForPrio[RQ_Q_PRIO_LOW] = 0
Queue Statistics Thu Apr 16 05:43:59 2015
------------------------------------------------------------
Number of lost wakeup datagrams: 0
Max. number of queue elements : 14000
NOWP: 0 (peak 5, writeCount 8, readCount 8)
DIA: 4 (peak 4, writeCount 4, readCount 0)
UPD: 0 (peak 0, writeCount 0, readCount 0)
ENQ: 0 (peak 0, writeCount 0, readCount 0)
BTC: 0 (peak 0, writeCount 0, readCount 0)
SPO: 0 (peak 0, writeCount 0, readCount 0)
UP2: 0 (peak 0, writeCount 0, readCount 0)
Session queue dump (high priority, 1 elements, peak 1):
-1 <- 26 < EmbryoQueue_DIA> -> -1
Session queue dump (normal priority, 0 elements, peak 0):
Session queue dump (low priority, 0 elements, peak 0):
Dump of queue <EmbryoQueue_DIA> in slot 26 (4 requests, port=0):
-1 <- 4 (rq_id 7, DIA, REQ_HANDLER_AUTOTH) -> 5
4 <- 5 (rq_id 9, DIA, REQ_HANDLER_MSADM) -> 2
5 <- 2 (rq_id 13, DIA, REQ_HANDLER_AUTOABAP) -> 3
2 <- 3 (rq_id 15, DIA, REQ_HANDLER_BGRFC_WATCHDOG) -> -1
Infos about some special queues:
Queue <DispatcherQueue> in slot 0 (port=59767) has no requests
Queue <GatewayQueue> in slot 1 (port=0) has no requests
Queue <IcmanQueue> in slot 2 (port=51399) has no requests
Queue <StartServiceQueue> in slot 3 (port=0) has no requests
Workprocess Table (long) Thu Apr 16 05:43:59 2015
------------------------------------------------------------
Current snapshot id: 1
Number of preemptions : 0
|No |Pid |Type|State |Cause|Err|Prio|Sess-Key |Sess-Type|Locked|Sem|Time |Program |Cli|User |Action |Action-Info |
|---+------+----+-------+-----+---+----+----------------+---------+------+---+-----+----------------------------------------+---+------------+--------------------+--------------------|
| 0| |DIA |WP_KILL| |1 | | | | | | | | | | | |
| 1|4416 |DIA |WP_NEW | | | | | | | | | | | | | |
| 2|744 |DIA |WP_NEW | | | | | | | | | | | | | |
| 3|1156 |DIA |WP_NEW | | | | | | | | | | | | | |
| 4|4412 |DIA |WP_NEW | | | | | | | | | | | | | |
| 5|2264 |DIA |WP_NEW | | | | | | | | | | | | | |
| 6|872 |DIA |WP_NEW | | | | | | | | | | | | | |
| 7|4672 |DIA |WP_NEW | | | | | | | | | | | | | |
| 8|4700 |DIA |WP_NEW | | | | | | | | | | | | | |
| 9|4660 |DIA |WP_NEW | | | | | | | | | | | | | |
| 10|1696 |UPD |WP_NEW | | | | | | | | | | | | | |
| 11|4484 |BTC |WP_NEW | | | | | | | | | | | | | |
| 12|4944 |BTC |WP_NEW | | | | | | | | | | | | | |
| 13|5060 |BTC |WP_NEW | | | | | | | | | | | | | |
| 14|968 |SPO |WP_NEW | | | | | | | | | | | | | |
| 15|4408 |UP2 |WP_NEW | | | | | | | | | | | | | |
Session Table Thu Apr 16 05:43:59 2015
------------------------------------------------------------
No logons/sessions found
CA Blocks
0 INVALID -1
1 ca_blk slots of 6000 in use, 1 currently unowned (in request queues)
********** SERVER SNAPSHOT 1 (Reason: Workprocess 0 died) - end **********
***LOG Q41=> DpDumpInternalTables, () [dpxxdisp.c 3200]
*** ERROR => DpHdlDeadWp: W1 (pid 4416) died (severity=0, status=0) [dpxxwp.c 1278]
DpSkipSnapshot: delayed snapshot exist, skip new snapshot
*** ERROR => DpHdlDeadWp: W2 (pid 744) died (severity=0, status=0) [dpxxwp.c 1278]
DpSkipSnapshot: delayed snapshot exist, skip new snapshot
*** ERROR => DpHdlDeadWp: W3 (pid 1156) died (severity=0, status=0) [dpxxwp.c 1278]
DpSkipSnapshot: delayed snapshot exist, skip new snapshot
*** ERROR => DpHdlDeadWp: W4 (pid 4412) died (severity=0, status=0) [dpxxwp.c 1278]
DpSkipSnapshot: delayed snapshot exist, skip new snapshot
*** ERROR => DpHdlDeadWp: W5 (pid 2264) died (severity=0, status=0) [dpxxwp.c 1278]
DpSkipSnapshot: delayed snapshot exist, skip new snapshot
*** ERROR => DpHdlDeadWp: W6 (pid 872) died (severity=0, status=0) [dpxxwp.c 1278]
DpSkipSnapshot: delayed snapshot exist, skip new snapshot
*** ERROR => DpHdlDeadWp: W7 (pid 4672) died (severity=0, status=0) [dpxxwp.c 1278]
DpSkipSnapshot: delayed snapshot exist, skip new snapshot
*** ERROR => DpHdlDeadWp: W8 (pid 4700) died (severity=0, status=0) [dpxxwp.c 1278]
DpSkipSnapshot: delayed snapshot exist, skip new snapshot
*** ERROR => DpHdlDeadWp: W9 (pid 4660) died (severity=0, status=0) [dpxxwp.c 1278]
DpSkipSnapshot: delayed snapshot exist, skip new snapshot
*** ERROR => DpHdlDeadWp: W10 (pid 1696) died (severity=0, status=0) [dpxxwp.c 1278]
DpSkipSnapshot: delayed snapshot exist, skip new snapshot
*** ERROR => DpHdlDeadWp: W11 (pid 4484) died (severity=0, status=0) [dpxxwp.c 1278]
DpSkipSnapshot: delayed snapshot exist, skip new snapshot
*** ERROR => DpHdlDeadWp: W12 (pid 4944) died (severity=0, status=0) [dpxxwp.c 1278]
DpSkipSnapshot: delayed snapshot exist, skip new snapshot
*** ERROR => DpHdlDeadWp: W13 (pid 5060) died (severity=0, status=0) [dpxxwp.c 1278]
DpSkipSnapshot: delayed snapshot exist, skip new snapshot
*** ERROR => DpHdlDeadWp: W14 (pid 968) died (severity=0, status=0) [dpxxwp.c 1278]
DpSkipSnapshot: delayed snapshot exist, skip new snapshot
*** ERROR => DpHdlDeadWp: W15 (pid 4408) died (severity=0, status=0) [dpxxwp.c 1278]
DpSkipSnapshot: delayed snapshot exist, skip new snapshot
*** DP_FATAL_ERROR => DpWpCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiIWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:00 2015
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:01 2015
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:02 2015
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:03 2015
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:04 2015
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:05 2015
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:06 2015
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:07 2015
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:08 2015
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:09 2015
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Apr 16 05:44:09 2015
------------------------------------------------------------
Current snapshot id: 1
Number of preemptions : 0
|No |Pid |Type|State |Cause|Err|Prio|Sess-Key |Sess-Type|Locked|Sem|Time |Program |Cli|User |Action |Action-Info |
|---+------+----+-------+-----+---+----+----------------+---------+------+---+-----+----------------------------------------+---+------------+--------------------+--------------------|
| 0| |DIA |WP_KILL| |1 | | | | | | | | | | | |
| 1| |DIA |WP_KILL| |1 | | | | | | | | | | | |
| 2| |DIA |WP_KILL| |1 | | | | | | | | | | | |
| 3| |DIA |WP_KILL| |1 | | | | | | | | | | | |
| 4| |DIA |WP_KILL| |1 | | | | | | | | | | | |
| 5| |DIA |WP_KILL| |1 | | | | | | | | | | | |
| 6| |DIA |WP_KILL| |1 | | | | | | | | | | | |
| 7| |DIA |WP_KILL| |1 | | | | | | | | | | | |
| 8| |DIA |WP_KILL| |1 | | | | | | | | | | | |
| 9| |DIA |WP_KILL| |1 | | | | | | | | | | | |
| 10| |UPD |WP_KILL| |1 | | | | | | | | | | | |
| 11| |BTC |WP_KILL| |1 | | | | | | | | | | | |
| 12| |BTC |WP_KILL| |1 | | | | | | | | | | | |
| 13| |BTC |WP_KILL| |1 | | | | | | | | | | | |
| 14| |SPO |WP_KILL| |1 | | | | | | | | | | | |
| 15| |UP2 |WP_KILL| |1 | | | | | | | | | | | |
Queue Statistics Thu Apr 16 05:44:09 2015
------------------------------------------------------------
Number of lost wakeup datagrams: 0
Max. number of queue elements : 14000
NOWP: 0 (peak 5, writeCount 8, readCount 8)
DIA: 4 (peak 4, writeCount 4, readCount 0)
UPD: 0 (peak 0, writeCount 0, readCount 0)
ENQ: 0 (peak 0, writeCount 0, readCount 0)
BTC: 0 (peak 0, writeCount 0, readCount 0)
SPO: 0 (peak 0, writeCount 0, readCount 0)
UP2: 0 (peak 0, writeCount 0, readCount 0)
Session queue dump (high priority, 1 elements, peak 1):
-1 <- 26 < EmbryoQueue_DIA> -> -1
Session queue dump (normal priority, 0 elements, peak 0):
Session queue dump (low priority, 0 elements, peak 0):
Dump of queue <EmbryoQueue_DIA> in slot 26 (4 requests, port=0):
-1 <- 4 (rq_id 7, DIA, REQ_HANDLER_AUTOTH) -> 5
4 <- 5 (rq_id 9, DIA, REQ_HANDLER_MSADM) -> 2
5 <- 2 (rq_id 13, DIA, REQ_HANDLER_AUTOABAP) -> 3
2 <- 3 (rq_id 15, DIA, REQ_HANDLER_BGRFC_WATCHDOG) -> -1
Infos about some special queues:
Queue <DispatcherQueue> in slot 0 (port=59767) has no requests
Queue <GatewayQueue> in slot 1 (port=0) has no requests
Queue <IcmanQueue> in slot 2 (port=51399) has no requests
Queue <StartServiceQueue> in slot 3 (port=0) has no requests
Logon Table Thu Apr 16 05:44:09 2015
------------------------------------------------------------
No logons/sessions found
CA Blocks
0 INVALID -1
1 ca_blk slots of 6000 in use, 1 currently unowned (in request queues)
NiIWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:10 2015
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:11 2015
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:12 2015
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:13 2015
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:14 2015
NiISelect: TIMEOUT occured (500ms)
NiISelect: timeout 500ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (5000ms)
DpSkipSnapshot: delayed snapshot exist, skip new snapshot
DpHalt: shutdown server >SAPVIAMSAZURE_ECC_00 < (normal)
DpUpdateStatusFile: update status file G:\usr\sap\ECC\DVEBMGS00\work\disp+work.status, unique number = 2
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 353 sent data (wrt=110,pac=1,MESG_IO)
<<< NiBufISelUpdate: hdl 353(0, SAP_O_K)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
NiMyHostName: hostname = 'SAPVIAMSAZURE'
NiHLGetNodeAddr: found hostname 'SAPVIAMSAZURE' in cache
NiIGetNodeAddr: hostname 'SAPVIAMSAZURE' = addr 100.79.22.46
NiHLGetHostName: found address 100.79.22.46 in cache
NiIGetHostName: addr 100.79.22.46 = hostname 'SAPVIAMSAZURE.SAPVIAMSAZURE.i4.internal.cloudapp.net' (fq)
DpMsUpdateLogon: dp_service: sapdp00
NiSrvLGetServNo: found service name 'sapdp00' in cache
NiIGetServNo: servicename 'sapdp00' = port 3200
DpMsUpdateLogon: set LB=0
MsIBuildLogonData: prot = MS_LOGON_DIAG (2)
MsIBuildLogonData: port = 3200 (4)
MsIBuildLogonData: addr (IPv4) = 100.79.22.46 (8)
MsIBuildLogonData: host = SAPVIAMSAZURE.SAPVIAMSAZURE.i4.internal.cloudapp.net (66)
MsIBuildLogonData: misc = LB=0 (72)
MsIBuildLogonData: addr (IPv6) = 100.79.22.46 (90)
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufSend starting
NiIWrite: hdl 353 sent data (wrt=206,pac=1,MESG_IO)
<<< NiBufISelUpdate: hdl 353(0, SAP_O_K)
MsINiWrite: sent 206 bytes
MsISnd2: send msg (ms hdr/msg 110/96 bytes) to name MSG_SERVER, type 0, key -
MsSndName: MS_SET_LOGON ok
Send 96 bytes to MSG_SERVER
MS_SET_LOGON : asynchronous call
DpMsUpdateLogon: gw_service: sapgw00
NiSrvLGetServNo: found service name 'sapgw00' in cache
NiIGetServNo: servicename 'sapgw00' = port 3300
MsIBuildLogonData: prot = MS_LOGON_RFC (2)
MsIBuildLogonData: port = 3300 (4)
MsIBuildLogonData: addr (IPv4) = 100.79.22.46 (8)
MsIBuildLogonData: host = SAPVIAMSAZURE.SAPVIAMSAZURE.i4.internal.cloudapp.net (66)
MsIBuildLogonData: addr (IPv6) = 100.79.22.46 (86)
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufSend starting
NiIWrite: hdl 353 sent data (wrt=202,pac=1,MESG_IO)
<<< NiBufISelUpdate: hdl 353(0, SAP_O_K)
MsINiWrite: sent 202 bytes
MsISnd2: send msg (ms hdr/msg 110/92 bytes) to name MSG_SERVER, type 0, key -
MsSndName: MS_SET_LOGON ok
Send 92 bytes to MSG_SERVER
MS_SET_LOGON : asynchronous call
DpHalt: switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
DpHalt: stop work processes
DpHalt: stop gateway
killing process (4004) (SOFT_KILL)
DpHalt: stop icman
killing process (4664) (SOFT_KILL)
DpHalt: terminate gui connections
DpHalt: wait for end of work processes
DpHalt: wait for end of gateway
[DpProcDied] Process lives (PID:4004 HANDLE:1144)
DpHalt: waiting for termination of gateway ...
NiIWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
NiISelect: TIMEOUT occured (500ms)
Thu Apr 16 13:44:15 2015
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:4004 HANDLE:1144 rc:0x0)
DpHalt: wait for end of icman
[DpProcDied] Process lives (PID:4664 HANDLE:1152)
DpHalt: waiting for termination of icman ...
NiIWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:16 2015
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4664 HANDLE:1152)
DpHalt: waiting for termination of icman ...
NiIWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1265
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 16 13:44:17 2015
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:4664 HANDLE:1152 rc:0x0)
DpStartStopMsg: send stop message (myname is >SAPVIAMSAZURE_ECC_00 <)
DpStartStopMsg: Write AD_STARTSTOP message with type= 0, name=SAPVIAMSAZURE_ECC_00, sapsysnr= 0, hostname=SAPVIAMSAZURE
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 00007FF6AF2244E0
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 4
AdCallRegisteredCvtToExt: opcode 4 call 00007FF6AF222060
AdCallRegisteredCvtToExt: opcode 4 exit rc=SAP_O_K
DpRqCreate: creating REQ_HANDLER_ADM request (rq_id 18, slot 13)
DpRqConvertToNetForm: converted from intern to net (164 bytes, reqRc 0), rq_id 18
DpRqFree: freeing REQ_HANDLER_ADM request (rq_id 18, slot 13)
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufSend starting
NiIWrite: hdl 353 sent data (wrt=866,pac=1,MESG_IO)
<<< NiBufISelUpdate: hdl 353(0, SAP_O_K)
MsINiWrite: sent 866 bytes
MsISndTypeOnce: send msg (ms hdr/msg 110/756 bytes) to MSG_SERVER, type 1
DpStartStopMsg: stop msg sent to message server o.k.
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
NiIRead: hdl 353 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 353
NiBufReceive starting
<<< NiBufISelUpdate: hdl 353(0, SAP_O_K)
MsINiRead: received 274 bytes
MsIReceive: received msg (ms hdr/msg 110/164 bytes), flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
NiIRead: hdl 353 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 353
NiBufReceive starting
<<< NiBufISelUpdate: hdl 353(0, SAP_O_K)
MsINiRead: received 114 bytes
MsIReceive: received msg (ms hdr/msg 110/4 bytes), flag 3, from MSG_SERVER , typ 0, key -
DpHalt: received 4 bytes from message server
NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
NiIRead: hdl 353 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 353
NiBufReceive starting
<<< NiBufISelUpdate: hdl 353(0, SAP_O_K)
MsINiRead: received 114 bytes
MsIReceive: received msg (ms hdr/msg 110/4 bytes), flag 3, from MSG_SERVER , typ 0, key -
DpHalt: received 4 bytes from message server
NiIRead: hdl 353 recv would block (errno=EAGAIN)
NiIRead: read for hdl 353 timed out (0ms)
DpHalt: more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 353 sent data (wrt=114,pac=1,MESG_IO)
<<< NiBufISelUpdate: hdl 353(0, SAP_O_K)
MsINiWrite: sent 114 bytes
MsISnd2: send msg (ms hdr/msg 110/4 bytes) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiIRead: hdl 353 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 353 (r)
NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
NiIRead: hdl 353 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 353
NiBufReceive starting
<<< NiBufISelUpdate: hdl 353(0, SAP_O_K)
MsINiRead: received 114 bytes
MsIReceive: received msg (ms hdr/msg 110/4 bytes), flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsISendKeepalive : keepalive sent to message server
NiIRead: hdl 353 recv would block (errno=EAGAIN)
Thu Apr 16 13:44:18 2015
NiIPeek: peek for hdl 353 timed out (r; 1000ms)
NiIRead: read for hdl 353 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
DpHalt: detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpMessageSer 2038]
NiBufSend starting
NiIWrite: hdl 353 sent data (wrt=110,pac=1,MESG_IO)
<<< NiBufISelUpdate: hdl 353(0, SAP_O_K)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server (SAPVIAMSAZURE / 3901)
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 353 in set0
SiSelNSet: set events of sock 1100 to: ---
<<< NiBufISelUpdate: hdl 353(0, SAP_O_K)
NiBufISelRemove: remove hdl 353 from set0
<<< NiBufISelUpdate: hdl 353(0, SAP_O_K)
SiSelNRemove: removed sock 1100
NiSelIRemove: removed hdl 353
DpDelSocketInfo: del info for nihdl 353 (pos/type=44/4)
DpMBufClearGlobalHighLoadCounter: reset global load flags
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 00007FF6AF2244E0
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00007FF6AF2251A0
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00007FF6AF2251A0
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
DpRqCreate: creating REQ_HANDLER_MSADM request (rq_id 19, slot 14)
DpCaLockBlk: locked ca_blk 1
DpRqSendRequest: REQ_HANDLER_MSADM (rq_id 19) from DISP to local DISP
DpCaGiveUpOwnerOfBlk: give up ownership of ca_blk 1
rq_id 19
-OUT- ca_blk 1 len 348
-OUT- reqHdlId REQ_HANDLER_MSADM
-OUT- sender address:
-OUT- type LOCAL
-OUT- agentType DISP
-OUT- receiver address:
-OUT- type LOCAL
-OUT- agentType DISP
RqQAddRequest: Add request rq_id 19 (NOWP) to queue <DispatcherQueue> in slot 0 at the end
Dump of queue <DispatcherQueue> in slot 0 (2 requests, in use, port=59767):
-1 <- 0 (rq_id 17, NOWP, REQ_HANDLER_ICMAN_OPCODE) -> 1
0 <- 1 (rq_id 19, NOWP, REQ_HANDLER_MSADM) -> -1
RqQQueueNotifySelectableHandle: Reuse NI connection for queue <DispatcherQueue> in slot 0 on port 59767 (10026)
RqQQueueNotifySelectableHandle: Signal selectable handle for queue <DispatcherQueue> in slot 0 on port 59767 (id=7)
NiDgHdlSend: hdl 361 sent 1 of 1 bytes to 127.0.0.1:59767
RqQQueueGetNumberOfRequests: Queue <DispatcherQueue> in slot 0 contains 2 requests of type NOWP
DpRqPutIntoQueue: put request into DISP queue (workerType 0, prio LOW, rq_id 19), queue has 2 requests
DpRqFree: freeing REQ_HANDLER_MSADM request (rq_id 19, slot 14)
DpMBufTypeMod: MBUF component DOWN (event=MBUF_DPEVT_DOWN)
NiICloseHandle: shutdown and close hdl 353/sock 1100
NiBufIClose: clear extension for hdl 353
MsIDetach: detach MS-system (SAPVIAMSAZURE / 3901)
DpHalt: cleanup EM
EsCleanup( )
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3136) [dpInit.c 3393]
DpHalt: Good Bye .....
↧
printing problem
Dear All,
I have printer configured as mentioned below
Device Type:-SAPWIN : MS Windows driver, latin1.
Device Class:- Standard Printer.
Access method: F:Printing on front end Computer.
Host printer : __Default
I have strange problem, when I print from this printer. Different printers are giving me different print outs.
What I have checked from my side.
Format of the paper is same for every printer.
Drivers are properly installed on local machine.
Any other suggestions?
Regards
Dharmendra
↧